marking machine for curved surface

marking machine is mainly produced for cylinder marking,it solves the problem that making marks on the outer curved surface

Technical parameters
Kinko CPU304 microcomputer control: 16bits
Eview MT506T colourful touch screen: 5.7 256 colours
Power supply: AC220V
Total power: 740W
Max marking output power(dual-power output): 500W
Max marking output current: 21A
Marking voltage, AC: 0-25V
Static power consumption: less than 30W
Marking counter range: 1200000
Stencil counter range: 110000
Marking liquid supply counting range: 1-100000
Marking timing range: 0-30s
Repetitive marking times: 1-5 times: (optional)
Time of marking water supply: 0.01-9s
Air pressure: 0.21Mpa

Features
1. Flexible and easy for marking on products;
2. The portable marking machine is suitable for making marks on the outer surface;
3. Higher integration of PLC and lower fault rate;
4. 16-bit PLC to realize higher control accuracy in the marking process;
5. Simple and clear operation of colourful touch screen;
6. Voltage is shown on the screen.
7. Over-current protection for marking voltage (alarming in case of more than approx. 13A) to prolong the service life of marking power parts;
8. Over-voltage protection for marking voltage (alarming in case of more than approx. 15V) to prevent the stencil plate from burning due to higher voltage;
9. Fully automatic and intelligent supply of marking liquid without manual interfere after setting up;
10. Automatic supply time of marking liquid can be set up in the initialization at will;
11. Alarm in case of a lack of marking liquid in the storage vessel;
12. The special clamp can fix the cylinder so as to ensure the marking quality;
13. The marking times is 1-5 times, optional.
14. Marking counter.
15. Printing frequency counting of stencil plate for the reference of stencil plate change;
16. Water supply counter
17. One-key recovery of ex-factory parameters;
18. One-key storage of user parameters;
19. One-key recovery of user parameters;
20. Touch screen with marking experiences, implies and fault messages and diagnosis for the operators reading as any time to master the optimum marking methods and reduce the consumptions;
21. It masters the best marking method so as to reduce the consumption costs.
22. The dual-power ensures good effect of making the larger marks.
24. Filter circuit is built in the marking interface card for avoiding the Pulse interference.