Wood Working Machine RC 1530

Wood Working Machine RC 1530
1.Working size: 1500mm X 3000mm X 200mm
2.HSD spindle
3.Hiwin linear rail
4.Good quality
With hard steel structure,
Wood Working Machine
RC 1530
is fit for hard wood working, like cutting and engraving on Rosewood for furniture, indoor decoration. And with the Vacuum holding way and dust collector, the mchine is qualified for mass-producing of furniture.
We use top quality compoents for the machines, like HSD spindle, Delta Inverter, Becker Vacuum pump,Hiwin linear and so on, to keep the machine in the best condition even after many years working.


Optional functions
We use the best quality parts for the CNC routers:
such as: Italian HSD air cooling spindle, Delta inverter, Germany Becker vacuum pump, Hiwin rail linear bearings and bakelite for the vacuum table.

Number
Discription
Parameter
1
X,Y,Z Working Area
1500x3000x200mm
2
Table Size
1750×3540mm
3
X,Y,Z Traveling Accuracy
±0.03/300mm
4
X,Y,Z Repositioning Accuracy
±0.03mm
5
Table Surface
Vacuum&T-slot combined table (Option:T-slot table)
6
Frame
Welded strucutre
7
X, Y Structure
Rack and Pinion Drive,Hiwin Rail Linear Bearings
8
Z Structure
Ball Screw, Hiwin Rail Linear Bearings
9
Max.Power Consumption (Without spindle)
2.0Kw
10
Max.Rapid Travel Rate
33000mm/min
11
Max.Working Speed
25000mm/min
12
Spindle Power Motor
4.5Kw HSD Spindle (Option:2.0kw/6.0 HSD spindle)
13
Spindle Speed
6000-18000RPM
14
Drive Motors
Stepper system (Option: Yaskawa servo, Panasonic servo)
15
Working Voltage
AC380V/50/60Hz,3PH (Option: 220V))
16
Command Language
G Code
17
Operating System
DSP System (Option: Mach3 PC Software)
18
Interface
USB
19
Flash Memory
128M(U Disk)
20
Collet
ER25
21
X,Y Resolution
<0.02mm
22
Software Compatability
Type3 software,Ucancam software(Option:Artcam software)